Fresh for Spas
A liquid formulation
of grease-cutting compounds and other ingredients designed to remove body
oils, suntan lotion, grease and other organic material, as well as scale
and mineral buildup from filter media.
Removes oils and
For use on all filters
and Removable DE Elements:
1. Remove elements
and rinse with clean water.
2. Prepare solution
by adding 16 oz. of FILTER FRESH to 2.5 gallons of warm water in a large
3. Place the elements
in the solution and allow to soak overnight (12 hours).
4. Remove the elements
and rinse thoroughly with clean water.
5. If possible,
allow cartridges to dry before reinstalling in filter.
For Sand Filters
or Filters Without Removable Elements:
1. Backwash filter
then shut off pump and drain water from filter. Leave handle in backwash
2. Make sufficient
solution by adding 32 oz. of FILTER FRESH for each 5 gallons of clean water.
Remove hair and lint pot cover. Slowly pour in solution with pump running.
Do not allow pump to run dry. Continue adding solution until the sand or
elements are covered.
3. Shut off pump
and allow solution to stand in filter overnight (12 hours).
4. Backwash filter
until backwash water is clear, then return filter to normal operation.
for filter cartridges.
ozone and mineral purification systems.
Deeps cleans and
improves the effectiveness of spa filters.